Valve controlled exhaust for Seat Leon Cupra
Exhaust muffler for Seat Leon Cupra flaps On 25. March 2016, The Car Freak In Car Tuning
Valve controlled exhaust system for the Cupra
So I now get some messages (requests), if I could recommend a (accessories-AGA (exhaust) exhaust valve Leon CUPRA. Now, the new CUPRA 290 became not only stronger, but he has also received a new exhaust system from the factory (not the ST/station wagon). And here want to retrofit some owners. One of the few producers /sellers provide a sound file of your exhaust for the CUPRA, JE DESIGN.
The refiner from Leingarten has developed exhaust systems for the Three – and five-door hatchback and station wagon called ST. Both exhaust systems are a perfect fit with the Original rear apron and is in addition to the EC type-approval is a Swiss confirmation, according to the ASA policy.
Use the new flaps systems can be exhaust easily via the touch screen and the “Seat Drive Profile” stored driving profiles Normal, Sport and Cupra. In modes Normal and Sport, the exhaust valve remains closed, the exhaust sounds sporty, but subtle.
Is used to select the Three – or five-door and station wagon, but the Cupra mode, it opens the exhaust valve of the exhaust as the gate to the Bullring. At the same time the innovative exhaust of THE DESIGN, what is technically sound in it:-bred Racing-Sound shows, as Motorsport fans, from the racetrack to know and love.
An optical Highlight is the four tailpipes with a diameter of 80 mm. These are characteristic of the manufactured exhaust system for the Cupra in the embodiment as a Three – or five-door hatchback.
the sound of the exhaust in the Sound Video sounds promising. Nice to see the function of the valve control
Included with the pre-silencer replacement pipe, the valve means of the silencer with the exhaust, the rear muffler with left/Right output, as well as the two beveled and rolled twin tailpipe emissions with clamp.
With the help of the CAN switching module for the exhaust is controlled. A pre-assembled cable and hose set complete with installation instructions provided with the kit that can be ordered for the price of 2.380€. Who wants to maintain the Three – or five-door hatchback the Original Look, but not throaty Motorsport-Sound, renounce, reaches for the flap exhaust system with oval tailpipes (140 x 90 mm). This is offered by JE DESIGN for the same price.
As in the Three – and five-door hatchback, the exhaust is controlled system for the Seat Leon ST Cupra so the Original driving profile selection from the house Seat. For the price of 2.499 Euro, there is the Sound Upgrade from four striking tailpipes with a diameter of 80 mm plus EC approval and installation instructions.
The Cupra 290 ( 3 / 5-door ) will work omitted by the manufacturer on the MSD. There are installed only VSD and ESD, but at the same time the tube diameter is reduced from the VSD to a measly 55 mm. The JE DESIGN klapppen exhaust system has in each case an end-to-end diameter of 70 mm and has an EC type-approval
The flap exhaust system for the ST Cupra will be manufactured from stainless steel and consists of a JE DESIGN stainless steel cat-back section and the Y-connecting pipe from the front muffler to the rear muffler.
Both rear silencers are equipped with an exhaust flap. They each open into a round, beveled and rolled-up double-end pipe with a diameter of 80 mm. A the CAN switching module for the flap control and a complete pre-assembled cable and hose set complete the range of components for the LEON ST Cupra.
The cost for this feast for the ears: 2.380.-€. This exhaust system would be exactly to my button. Because I like to, it is not always loud. Long distances on the motorway, for example, The only true solution is thus in a Flap exhaust system. The sound changes of each of the CUPRA modes are audible and IMHO perfectly matched to the CUPRA.
(Photos: THE DESIGN/tuning press)